Shop All Products
Showing 81 to 100 of 256 products.
Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.
Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 50 years as a superior sand handling, durable pump design.
FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.
Discharge Head: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience.
Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.
Stainless Steel Casing: Polished stainless steelis strong and corrosion resistant.
Hex Shaft Design: Six sided shafts for positive impeller drive.
Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.
Check Valve: Screws into discharge head from the top, easily removed for drain-back systems or replacement without disassembling the pump. Spring loaded, o-ring poppet design for positive seal in all conditions.
Crimped Design: For strength, will not separate in the harshest conditions.
FEATURES
High Capacity and Pressure: Specifically designed to deliver high capacities at greater pressures.
Stainless Steel Pump Shaft: Hex design provides positive drive for impellers and eliminates clearance adjustments.
Easy to Service: Can be taken apart for service by removing four bolts.
Corrosion Resistant: Glass filled thermoplastic impellers. Stainless steel wear rings and coverplates. Electrocoat paint process applied inside and out and then baked on.
Powered for Continuous Operation: Pump isdesigned for continuous operation. All ratings are within the motor manufacturer’s recommended working limits.
Convertible: Designed for use on shallow or deep well applications using appropriate Goulds Water Technology fittings.See the performance charts on the Technical Data Sheet for fittingorder numbers.
NSF Listed: The first NSF listed jet pumps in the industry. All jet pumps and shallow well components only, deep well components are not listed.
SPECIFICATIONS
Pump
Motor
Maximum temperature: 140ºF
SYSTEM COMPONENTS
- Packer System – well casing adapter AWJ2 (2") and turned coupling 64655.
- For Deep Well Systems – a pressure control valve such as an AV22KIT or AV22 plus a JDW tubing kit.
Additional Accessories Required:
Click on MORE INFO above toview the Technical Brochure.
- 125 PSI Working Pressure
- 304 Stainless Steel Connection
- Larger tank sizes in the 36, 52, 65 and 96 gallon models, providemore drawdown and improves pump performance.
- Butyl Rubber Parabolic Diaphragm - Prevents rubbing on tank wallor rolling over on itself.
- Direct connect diaphragm seal prevents any leakage between waterand air chambers.
- Powder coated water chamber provides maximum protection againstcorrosion.
- Projection welded air valve with "O" ring cap seal fordouble protection.
- Exclusive no-weld Rust-Guard ® base design assures proper paint coverage in the base area.
- Uniweld design - two-piece construction (on many models) createsonly one weld on the tank.
- Ultra-UV exterior powder finish offers the ultimate protectionagainst the elements.
- 5-year warranty
- Features 6 Performance Ranges: 5, 7, 10, 15, 20, and 25 gpm.
- Horsepower Ranges: 1/2 - 5.
- Discharge Head and Motor Bracket Produced with Industry Proven, Engineered Materials.
- Available in 300 Series Stainless Steel or High QualityThermoplastic Resins.
- Large Wrench Flat Area on the Discharge Head for Ease ofInstallation.
- Dry Run Designed Top Bearing Positively Supports the 300 Series Stainless Steel 7/16-inch Hex Shaft.
- Removable Internal Check Valve.
- Powered by Franklin Electric Corrosion-Resistant Super Stainless4-inch Submersible Motors with Lightning Protection.
- Maximum Water Temperature with Proper Flow is 120øF/49øC. Consult Factory for Details.
This well tank has been designed to store and deliver water under pressure between pump cycles in a domestic water system. It features a patented Controlled Action Diaphragm (CAD2) system that completely contains the system water in a safe NSF approved chamber. The CAD2 system prevents water from ever touching the internal walls of the tank which greatly reduces external condensation.
What It Does
Without a storage tank, a domestic water system's pump would cycle (turn on) every time there was a demand for water. This frequent and potentially short cycling would shorten the useful life of the pump. Flexcon well tanks are designed to store water when the pump is running and then deliver pressurized water back to the system whenthe pump is shut off. A properly sized well tank will store at least one gallon of water for every gallon per minute (GPM) of pump capacity. This allows for fewer pump starts and longer run times which should maximize the life of the pump.