Wholesale Pump & Supply ProductsShop All Products
Shop All Products
Showing 141 to 160 of 256 products.
Basic Features
*Note: Picture is illustrative and may not reflect the actualproduct.*
- Corosion-Resistant Construction
- Stainless Steel Splined Shaft
- Hermetically-sealed Windings
- Anti-Track Self-Healing Resin System
- Water lubrication
- Filter Check Valve (Water Well)
- Kingbury-type Thrust Bearing
- Pressure Equalizing Diaphragm
- Built-in Lightning Arrestors (single-phase)
- Removable Water-Bloc(tm) Lead installed in 60Hz and dualfrequency rated water well motors.
- NEMA Pump Mounting Dimensions
- UL 778 Recognized (North American Voltages)
- CSA C22.2 #108 Certified
- Sand Fighter Slinger
- NSF/ANSI 61 Certified
*Note: Picture is illustrative and may not reflect the actualproduct.*
FEATURES
- Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.
- Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts.
- Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 50 years as a superior sand handling, durable pump design.
- FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.
- Discharge Head/Check Valve: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.
- Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.
- Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant.
- Hex Shaft Design: Six sided shafts for positive impeller drive.
- Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.
Click on MORE INFO above to view the Technical Brochure.
Operation
This well tank has been designed to store and deliver water under pressure between pump cycles in a domestic water system. It features a patented Controlled Action Diaphragm (CAD2) system that completely contains the system water in a safe NSF approved chamber. The CAD2 system prevents water from ever touching the internal walls of the tank which greatly reduces external condensation.
What It Does
Without a storage tank, a domestic water system's pump would cycle (turn on) every time there was a demand for water. This frequent and potentially short cycling would shorten the useful life of the pump. Flexcon well tanks are designed to store water when the pump is running and then deliver pressurized water back to the system whenthe pump is shut off. A properly sized well tank will store at least one gallon of water for every gallon per minute (GPM) of pump capacity. This allows for fewer pump starts and longer run times which should maximize the life of the pump.
This well tank has been designed to store and deliver water under pressure between pump cycles in a domestic water system. It features a patented Controlled Action Diaphragm (CAD2) system that completely contains the system water in a safe NSF approved chamber. The CAD2 system prevents water from ever touching the internal walls of the tank which greatly reduces external condensation.
What It Does
Without a storage tank, a domestic water system's pump would cycle (turn on) every time there was a demand for water. This frequent and potentially short cycling would shorten the useful life of the pump. Flexcon well tanks are designed to store water when the pump is running and then deliver pressurized water back to the system whenthe pump is shut off. A properly sized well tank will store at least one gallon of water for every gallon per minute (GPM) of pump capacity. This allows for fewer pump starts and longer run times which should maximize the life of the pump.
PROMAX ® PLUS
- 125 PSI Working Pressure
- 304 Stainless Steel Connection
- Larger tank sizes in the 36, 52, 65 and 96 gallon models, providemore drawdown and improves pump performance.
- Butyl Rubber Parabolic Diaphragm - Prevents rubbing on tank wallor rolling over on itself.
- Direct connect diaphragm seal prevents any leakage between waterand air chambers.
- Powder coated water chamber provides maximum protection againstcorrosion.
- Projection welded air valve with "O" ring cap seal fordouble protection.
- Exclusive no-weld Rust-Guard ® base design assures proper paint coverage in the base area.
- Uniweld design - two-piece construction (on many models) createsonly one weld on the tank.
- Ultra-UV exterior powder finish offers the ultimate protectionagainst the elements.
- 5-year warranty
Operation
This well tank has been designed to store and deliver water under pressure between pump cycles in a domestic water system. It features a patented Controlled Action Diaphragm (CAD2) system that completely contains the system water in a safe NSF approved chamber. The CAD2 system prevents water from ever touching the internal walls of the tank which greatly reduces external condensation.
What It Does
Without a storage tank, a domestic water system's pump would cycle (turn on) every time there was a demand for water. This frequent and potentially short cycling would shorten the useful life of the pump. Flexcon well tanks are designed to store water when the pump is running and then deliver pressurized water back to the system whenthe pump is shut off. A properly sized well tank will store at least one gallon of water for every gallon per minute (GPM) of pump capacity. This allows for fewer pump starts and longer run times which should maximize the life of the pump.
This well tank has been designed to store and deliver water under pressure between pump cycles in a domestic water system. It features a patented Controlled Action Diaphragm (CAD2) system that completely contains the system water in a safe NSF approved chamber. The CAD2 system prevents water from ever touching the internal walls of the tank which greatly reduces external condensation.
What It Does
Without a storage tank, a domestic water system's pump would cycle (turn on) every time there was a demand for water. This frequent and potentially short cycling would shorten the useful life of the pump. Flexcon well tanks are designed to store water when the pump is running and then deliver pressurized water back to the system whenthe pump is shut off. A properly sized well tank will store at least one gallon of water for every gallon per minute (GPM) of pump capacity. This allows for fewer pump starts and longer run times which should maximize the life of the pump.
PROMAX ® PLUS
- 125 PSI Working Pressure
- 304 Stainless Steel Connection
- Larger tank sizes in the 36, 52, 65 and 96 gallon models, providemore drawdown and improves pump performance.
- Butyl Rubber Parabolic Diaphragm - Prevents rubbing on tank wallor rolling over on itself.
- Direct connect diaphragm seal prevents any leakage between waterand air chambers.
- Powder coated water chamber provides maximum protection againstcorrosion.
- Projection welded air valve with "O" ring cap seal fordouble protection.
- Exclusive no-weld Rust-Guard ® base design assures proper paint coverage in the base area.
- Uniweld design - two-piece construction (on many models) createsonly one weld on the tank.
- Ultra-UV exterior powder finish offers the ultimate protectionagainst the elements.
- 5-year warranty
Suitable for
- Livestock watering
- Livestock watering with solar solutions
- Agriculture solar solutions
- Solar boosting & water supply
- Community water supply
- Community solar solutions
- Municipal solar solutions(/li>
Construction:
Annealed bare stranded copper conductors PVC insulated and runparallel with a PVC black jacket to form a 75°C 600 VoltMulti-Conductor Submersible Pump Cable. UL Listed per UL 83 Type THWas Deep Well Submersible Pump Cable.
Features:
- Resistant to acid, abrasion, alkalis, flame, gas and oil.
- Water and sunlight resistant
- Cable is sequentiallymarked.